Flange material flange welding process

The flange is the interconnecting part between the pipe and the pipe, used for the connection between the pipe ends; it is also used in the flange of the equipment for the connection between the two devices, such as the reducer flange. Flange connection or flange joint refers to the detachable connection of flanges, gaskets and bolts as a set of combined sealing structures. Today, Xiao Bian gave everyone the relevant knowledge of flanges to see what flange materials .

Flange material

WCB (carbon steel), LCB (low temperature carbon steel), LC3 (3.5% nickel steel), WC5 (1.25% chromium 0.5% molybdenum steel), WC9 (2.25% chromium), C5 (5% chromium 0.5% molybdenum), C12 (9% Chromium 1% Molybdenum), CA6NM (4 (12% Chromium Steel), CA15 (4) (12% Chromium), CF8M (316 Stainless Steel), CF8C (347 Stainless Steel), CF8 (304 Stainless Steel), CF3 (304L Stainless steel), CF3M (316L stainless steel), CN7M (alloy steel), M35-1 (Monel), N7M (Hast nickel alloy B), CW6M (Hasta nickel alloy C), CY40 (Inconel) Wait.

Flange welding process

Required equipment

A set of manual welding equipment, a handle angle grinder, an electric hammer, a flat surface.

Prepare for welding

1. Check the debugging equipment to ensure the normal operation of the equipment;

2. Prepare φ4.0J402 electrode for best drying at 300°C-350°C for one hour.

Welding process

1. Assembly The vertebral body and the large flange are assembled together according to the requirements of the drawings, and the flange is divided equally into 8 equal parts.

2. Because the flange is thicker and the groove is larger, it adopts segmental symmetry and multi-layer welding.

Weld quality

The weld strength is required to be at least that of the base metal. The surface of the weld is smooth and smooth, with no defects such as burn-through, porosity, weld leakage, slag inclusion, undercut, and full welding. The remaining height is less than 2mm.

Precautions

1. Be sure to use the J506 electrode for hand build-up and make use of low current welding. In strict accordance with the welding process welding.

2. After each welding position, use the horizontal ruler to check the deformation of the flange plane.

3. One side of the welding side is hammered with a pneumatic hammer to achieve the effect of eliminating stress.

The above is a description of the relevant material of the flange material, and I hope to help you. For more information on flanges, please continue to pay attention to information on this site.

Flange

We are major at Cementing and Fracturing Equipment, Gate Valve and Wellhead Christmas Tree,Plunger Pumps and Mud Pumps, Flow line Products, Solid Control Equipment,Drilling Rigs and Work over Rigs Matching Equipment etc.

High quality & Steady quantity & Most competitive price will be sent for you.

Looking forward our cooperation.